In this blog post we are going to discuss how to derestrict a Giant eBike. We will run through the different options for 2017-2024 models including the latest Syncdrive Pro2 motor found on the Trance X and Reign E+. Before we start, please note that removing the speed limit on your eBike can void your warranty and are only to be used on private land.
(Last updated 19th June 2024)
How to find the correct tuning chip for my Giant eBike?
We’re going to run through the best options for all of the main Giant motors from 2017 onwards. The best way to check what motor you have is to take a look at the specifications provided in your manual or online. You’ll notice that each motor has a different level of torque (nm). Here are the most common examples;
Giant Trance X & Reign E+ with Syncdrive Pro2 (85nm)
Giant Stance E+ 2023 with Syncdrive Sport (75nm)
Giant Road E+ & Explore E+ with Syncdrive Pro (80nm), Life, Core
Giant Fathom E+ with Syncdrive Sport (70nm)
Best tuning chip for Giant Trance X & Reign E+ eBikes (2022-24)
VOLspeed V4 for Giant Syncdrive Pro2 85nm & Sport 75nm
The reason why we recommend this tuning chip is that not only does it remove the 25km/h speed restriction but it allows you to easily set a new max speed limit on your ebike. This is a brilliant feature as it keeps you in control of the speed and gives you flexibility as it can be adjusted at any time. The V4 version is a true plug & play solution that doesn't require any initial programming, it also gives you full use of the bike’s display. After installing the chip, simply press the button sequence to set your new max speed limit (up to 45kmh). It’s compatible the 85nm Syncdrive Pro2 motor or 75nm Syncdrive Sport.
Check out our detailed review here
You will need these tools to fit it;
Allen Key 2.5 / 3 / 8
Torx Key TX25
Best tuning chip for Syncdrive Pro (80nm), Life, Sport & Core motors (2017-2024)
We recommend two options for these motors. Firstly, if your Giant has a display fitted, we recommend the VOLspeed V4 Giant. It's a true plug & play solution that doesn't require any initial programming, it also gives you full use of the bike’s display. After installing the chip, simply press the button sequence to set a new max speed limit (up to 45kmh).
You will need these tools to fit it;
Allen Key 2.5 / 3 / 8
Torx Key TX25
Crank Puller
Does this affect my warranty?
It’s important to understand that installing a third party device onto your ebike can potentially void your warranty. However, the options we have discussed above are not detectable and are safe for your ebike. All of them are fully tested on the latest software versions.
Quick Links
Syncdrive Pro2 85nm & Syncdrive Sport 75nm (2023 onwards)
VOLspeed V4 Tuning Chip for Giant 22-23 Syncdrive Pro2 85nm - Shop Now
Syncdrive Pro (80nm), Life, Sport & Core motors (2017-2023)
VOLspeed V4 Tuning Chip for Giant Syncdrive 2017-23 - Shop Now
All of our tuning chips are available to order from our UK & International warehouses. We ship worldwide and accept GBP, EUR, USD, AUD, CAD.
Want to get early access to new product launches & exclusive offers? Subscribe to our newsletter - we’ll keep you in the loop
Don’t forget to follow us on Facebook & Instagram too!
Ebiketuner limited are an authorised distributor of ebike tuning chips & GPS trackers. We work directly with brands like Speedbox, VOLspeed, sIMPLEk & Powunity
Legal
Electric bikes equipped with tuning devices are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with tuning products can be used exclusively on private property and entirely at one’s own risk. Under the EU's EN15194 regulation it is illegal to ride your eBike on public roads/cycle paths with a tuning device fitted. By purchasing a device from eBike tuner ltd you agree that eBike tuner ltd cannot be held liable for any damage, injury, fine or cost to you, your eBike or anyone else involved in your particular incident.
Warranty
The use of any tuning products may void the warranty of your eBike. We take no responsibility for any damages resulting from the use of any of our products.
35 comments
I have a 2024 giant talon e, can you please tell me how I can remove the speed limiter
Thank you
———
EBIKE TUNER replied:
Hi Lee. Please check the software version of your Smart Gateway. You’ll be able to find that info in your display if you have one or via the Ride Control app. If you haven’t updated your software to the latest version (20240314000 or newer), then this VOLspeed V4 is compatible: https://ebiketuner.com/products/volspeed-v4-ebike-tuning-kit-for-giant-ebikes
I have 2020 Giant Revolt E+ Pro – what do you recommend to de-restrict? Specs:
Motor – Giant SyncDrive Pro
Sensors – Giant PedalPlus 6-sensor technology
Display – Giant RideControl EVO
Battery – Giant EnergyPak Smart 375, 36V Integrated Lithium-Ion with added EnergyPak Plus Extender battery
———
EBIKE TUNER replied:
Thanks for getting in touch, Hugh. Please check the software version of your Smart Gateway. You’ll be able to find that info in your display if you have one or via the Ride Control app. If you haven’t updated your software to the latest version (20240314000 or newer), then this VOLspeed V4 is compatible – https://ebiketuner.com/products/volspeed-v4-ebike-tuning-kit-for-giant-ebikes
I have Giant SyncDrive Pro2 85Nm motor on my GIANT Trance X E+ 2 800 Wh but i do the newest upadate via Giant app. Which chip is for me?
———
EBIKE TUNER replied:
If the Smart Gateway software version is 20240314000 or newer, it won’t be compatible with our range of tuning kits. Hopefully we’ll have an alternative in a couple of months. Please register your email here and we’ll let you know when they are available – https://ebiketuner.com/pages/be-the-first-to-know-about-giant-tuning-kits
how about the Voya E+ 3, its got the Syncdrive Move rear motor. Can’t find info anywhere on if I can unlock the 20mph limit :(
———
EBIKE TUNER replied:
Hi Jacob. Unfortunately it’s not possible to derestrict a rear hub motor.
Can you derestrict a new Roam E+ GTS. Need to know before I buy. Tx.
———
EBIKE TUNER replied:
Thanks for getting in touch, Adrian. If you haven’t updated your software to the latest version (20240314000 or newer), then this VOLspeed V4 is compatible: https://ebiketuner.com/products/volspeed-v4-ebike-tuning-kit-for-giant-ebikes