Products works great. Easy install and activation. No more speed limiter!
Great so far not had chance to fully test it out yet
Honest feed back. This is not really what I expected but is kind of working. Bike; Cube Reaction 800
I fitted the chip on Friday as per the instructions (having read them several times just so a knew what I was expected to do). Install was straight forward
The cavity space where the chip sits must be tight as this took a little giggling to get the bolts back in. I was being careful so this took a while to install.
Use; it is very annoying not knowing if the chip is ON.
Out on my ride I had an error code 523001 this code seems to coincide with undulating ground. this happened multiple times.
the speed display didn't seem to relate and occasionally when the unit speed showed 14mph the bike seemed to Lag. There was times when there would be no speed display (at moving off).
The speed display would only show max of 17mph even when going down hill.
Just wondering if the chip with the new sensor on the spoke may have better
regards Chris M
Hi Christopher, thanks for your feedback on this kit. One thing to note is that since the 16.19 bosch update, its important to ensure that the battery cable from the bike does not touch the tuning module. Due to the increased electrical current from this update it can cause an intermittent error like this.
If you require any assistance with the placement of the tuning module, send us a message to support@ebiketuner.com and one of the team will help you.
Just to address your point re the speed readings. This is to be expected, when riding above the factory limit the readings stay fixed at roughly this speed. Unfortunately it's a limitation of tuning any Bosch smart system motor, it's not possible to get fully accurate readings above the factory limit.
Best wishes
Team @ ebiketuner
Seeing as the Bosch performance line cx Gen 5 motor is newish and operates with the smart system I was very aware there maybe implications fitting a derestrictor.
The bike has a rim magnet so when choosing a unit the Volspeed jumped out as there are no additional unsightly wires to run.
Ordering the unit was flawless and infact it turned up earlier than expected.
The fitting was relatively easy, I found it easier to have the bike upside-down (2025 Whyte Kado Rsx)
Remove covers, disconect wires, drop the chain off and unbolt as necessary. On the Kado there is a plate to remove before the motor can be removed, bit of a fiddle but ok to get too, unbolt the motor and remove from the
frame.
Fit the unit to the motor using the longest spring clip provided and then refit. There is plenty of room on the Kado rsx for this unit so don't worry about space, rebuild and then turn the bike upright.
Turn on the bike and carry out the programing as invthe booklet.
And then smile when taking the bike for its first spin!!
Touch wood all seems fine, speed is set at 28.1mph, this allows me to ride the bike without hitting that wall at around 15/16mph, you can happily ride around 18/19/20mph. I have done a 20 mile ride and found the battery definitely used more than usual but I have been pushing it.
What I have found is you easily out pedal the bikes gearing, I use my bike both on and off road so if I could get a 38 front ring gear that would be a game changer!
If like me you need to get past that wall and have fun do it!!! Great little upgrade.
Perfect mod for my Cube 144.Race
I makes the bike come alive....
Cheers
Nick
Delivery was brilliant and got all theinformation i wanted when i was ordering it. But I’ve tried to get in contact with them after receiving it and have had no reply from them. My bike showing speedsensor fault
Hi Scott, we sent you a message on email about this a couple of days ago. Hopefully you can see this one, send us an email to support@ebiketuner.com and we'll help you with this.
This kit has been successfully fitted on all of the current Cube's so we're confident we can get it running perfectly for you
Excellent customer service. Excellent fitting instructions. Excellent performance so far. Great for off road fun.
Wowsers.. genuinely transformed my riding experience..wasn't looking for maxing out speed everywhere just needed extra boost at certain points on the trail.. it has eliminated the frustrating feeling of deceleration just when least expected.. it has made me want to get out even more..
This totally transformed my Levo Turbo Comp Ally S3. the bike feels perfect now. It doesn’t need full speed set up as the gearing limits it to about 35kph on the flat when I’m on private land. I only took a star off as there were lots of error messages at the start which became a bit frustrating. It’s settled now and has been perfect. A very good buy.
So far fantastic, it arrived quickly and was easy to install when using the included instructions. Simple to use to switch on or off as and when I need it on open trails of in the forest.
Arrived rapidly, easy to fit and works great
I’ve fitted a Vs to my cube action team. No issues.This has thrown repeated faults and my display no longer shows charging. I’ll need to strip it all out again. I’ve fitted the VS as I’ve said to my cube action team, Fantastic , a specialized Levoceraptor too so I’m confident using this type of kit. I hope it’s not going to be a costly mistake. I’ll persevere.
stops any lag and improves the overall ride, brilliant.
Works perfectly and very easy to install.
Easy to fit and great that you can turn it on and off with the cod.
Fitted this kit to my 2025 cube stereo 140 pro 800, installation was very straightforward, been running it for about 3 weeks now and had no issues at all. Highly recommend
Easy to installwith good instructions