Speedbox 1.1 for Bosch Smart System eBikes - Review

Speedbox 1.1 for Bosch Smart System eBikes - Review

In this blog post we are going to review the Speedbox 1.1 tuning chip for Bosch Smart System eBikes. This tuning chip comes in two versions; Standard or B.Tuning, we will compare both, explain the differences and give you our recommendation.

Before we start, please note that removing the speed limit on your eBike can void your warranty, derestricted eBikes are illegal and only to be used on private land.

IMPORTANT: Currently there are no tuning kits available for Bosch Smart Bikes fitted with the Speed Sensor on the rear wheel valve (Bosch Rim Magnet).

If you own one of these, register your interest here and we'll keep you up to date with new product releases.

How to know if your eBike has a Bosch smart system?

If you are unsure whether your ebike has a Bosch Smart System, all you need to do is check your spec. If you see the spec below you have a Bosch Smart System, if your ebike has a Purion, Kiox or Intuvia display then you do not have the Bosch Smart System (check out our other post).

On the specifications you'll see the following;

1. LED Remote on the handlebar or System Controller & Mini Remote

2. Connected to Bosch Flow Smartphone App

3. Kiox 300 or Intuvia 100 Display (some models do not have displays)

Speedbox 1.1 Standard or B.Tuning?

The key difference between the two Speedbox 1.1’s is that the B.Tuning version has Bluetooth integrated. Both versions are fitted in the same way and offer the exact same performance, however, the B.Tuning has lots of other cool features which we will now discuss.

1. Set a new max on your ebike - this is an all new feature and only available on the bluetooth version. The standard version allows riders to remove the 25km/h limit only.

2. Enable invisible mode to prevent unauthorised use

3. Accurate ride data in real-time via the Speedbox app. Data is taken directly from the ebike motor

Will the Speedbox 1.1 harm my motor?

The Speedbox 1.1 for Bosch Smart System has been improved significantly since the original 1.0 was released in 2021. Speedbox were quick to address the reliability issues that plagued the 1.0 version. 

Like all Speedbox tuning chips, this one is undetectable. What this means is that won’t appear on any reports if you were to take your ebike in for a service.

Riders can turn the Speedbox 1.1 off at any time using the LED controller or app (if using B.Tuning). When using your derestricted ebike on private land, you will find that it’s actually pretty difficult to reach excessive speeds unless you have a set of very fast feet, however 32-45km/h is achievable.

We haven’t had any reports of the Speedbox 1.1 causing excessive wear or damage to the motor.

If you’re concerned about this, we advise choosing the B.Tuning version due to the speed setting functionality.

Will the Bosch Smart System detect the Speedbox?

As mentioned above, both of these tuning chips are completely undetectable. Bosch have implemented anti-tuning detection on their ebike drive systems since 2020, this is why tuning chips like the Speedbox and VOLspeed have grown in popularity.

They offer a far more reliable solution compared to a few years ago when you could adjust the magnet slightly on your rear wheel to alter the speed limit.

The Speedbox is able to bypass the anti-tuning detection by running a short countdown at the end of your ride. This ensures that your ebike is recording the true distance and prevents skewed readings being sent to the computer - which will likely cause a tuning error.

Riders can minimise the risk of triggering an error by following these steps;

1. Only switch the Speedbox on/off before starting a ride. Not mid-ride

2. Keep average speed below 40kmh

3. Allow the bike to turn itself off once a ride is finished

Verdict

Speedbox have been manufacturing tuning chips for all of the major ebike motors for the last 5 years. All of their chips come with original connectors and meet high standards of quality control to give customers peace of mind - these ebikes are an expensive toy after all.

If you're looking for the most complete tuning chip for your Bosch Smart System ebike we highly recommend the SpeedBox 1.1 B.Tuning.

It’s slightly more expensive than the basic version, but we feel the additional features we discussed earlier present great value for money for riders.

If you're not too fussed about the speed setting feature or app integration, go for the standard SpeedBox 1.1. Performance-wise it's exactly the same, you just give up all the additional features.

Both of these tuning chips are available to order now

SpeedBox 1.1 B.Tuning For Bosch Smart System - Shop Now

SpeedBox 1.1 Standard For Bosch Smart System - Shop Now

 

All of our tuning chips are available to order from our UK warehouse. We ship worldwide and accept GBP, EUR, USD, AUD, CAD.

Want to get early access to new product launches & exclusive offers? Subscribe to our newsletter - we’ll keep you in the loop

Don’t forget to follow us on Facebook & Instagram too!

Ebiketuner limited are an authorised distributor of ebike tuning chips. We work directly with brands like Speedbox, VOLspeed, Levociraptor & PearTune.

Legal

Electric bikes equipped with tuning devices are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with tuning products can be used exclusively on private property and entirely at one’s own risk. Under the EU's EN15194 regulation it is illegal to ride your eBike on public roads/cycle paths with a tuning device fitted. By purchasing a device from eBike tuner ltd you agree that eBike tuner ltd cannot be held liable for any damage, injury, fine or cost to you, your eBike or anyone else involved in your particular incident.

Warranty

The use of any tuning products may void the warranty of your eBike. We take no responsibility for any damages resulting from the use of any of our products.

Terug naar blog

7 reacties

Hi. Is it possible to assembly and use the speedbox 1.0 for bosch smart system with led remote only i.e. without a display?
———
EBIKE TUNER replied:
Thanks for getting in touch. Yes, you can still use the Speedbox 1.0 even if you have no display. You can download the flow app to act as your display.

Mike

Hello, i have a Bosch smart motor with Kiox display 2023. I have ordered the speedbox and when i bought my bike it was installed. I read a lot of negative comments about the speedbox in combination with de recent Smart engines. I am very concerned about my purchase. Are you beiing notified about other customers who have problems, with the chip like – Malfunction, limp mode, errors 110000 or others..
My supplier of the bike mentioned that there were problems with the smart engines (Chipped) and no solutions for them.
Can you please keep me informed.
Some forums:
1. Bosch Smart system with Speedbox 1.0b (Don’t buy) | Pedelecs – Electric Bike Community
2. Derestricting bosch smart system | Page 2 | EMTB Forums

Thank you
———
EBIKE TUNER replied:
Hey thanks for getting in touch. Please email us at support@ebiketuner.com with your order number and one of the team will respond.

kevin

Reactie plaatsen

Let op: opmerkingen moeten worden goedgekeurd voordat ze worden gepubliceerd.