Honest feed back. This is not really what I expected but is kind of working. Bike; Cube Reaction 800
I fitted the chip on Friday as per the instructions (having read them several times just so a knew what I was expected to do). Install was straight forward
The cavity space where the chip sits must be tight as this took a little giggling to get the bolts back in. I was being careful so this took a while to install.
Use; it is very annoying not knowing if the chip is ON.
Out on my ride I had an error code 523001 this code seems to coincide with undulating ground. this happened multiple times.
the speed display didn't seem to relate and occasionally when the unit speed showed 14mph the bike seemed to Lag. There was times when there would be no speed display (at moving off).
The speed display would only show max of 17mph even when going down hill.
Just wondering if the chip with the new sensor on the spoke may have better
regards Chris M

Seeing as the Bosch performance line cx Gen 5 motor is newish and operates with the smart system I was very aware there maybe implications fitting a derestrictor.
The bike has a rim magnet so when choosing a unit the Volspeed jumped out as there are no additional unsightly wires to run.
Ordering the unit was flawless and infact it turned up earlier than expected.

The fitting was relatively easy, I found it easier to have the bike upside-down (2025 Whyte Kado Rsx)
Remove covers, disconect wires, drop the chain off and unbolt as necessary. On the Kado there is a plate to remove before the motor can be removed, bit of a fiddle but ok to get too, unbolt the motor and remove from the
frame.
Fit the unit to the motor using the longest spring clip provided and then refit. There is plenty of room on the Kado rsx for this unit so don't worry about space, rebuild and then turn the bike upright.
Turn on the bike and carry out the programing as invthe booklet.
And then smile when taking the bike for its first spin!!
Touch wood all seems fine, speed is set at 28.1mph, this allows me to ride the bike without hitting that wall at around 15/16mph, you can happily ride around 18/19/20mph. I have done a 20 mile ride and found the battery definitely used more than usual but I have been pushing it.
What I have found is you easily out pedal the bikes gearing, I use my bike both on and off road so if I could get a 38 front ring gear that would be a game changer!
If like me you need to get past that wall and have fun do it!!! Great little upgrade.

Perfect mod for my Cube 144.Race
I makes the bike come alive....
Cheers
Nick

Delivery was brilliant and got all theinformation i wanted when i was ordering it. But I’ve tried to get in contact with them after receiving it and have had no reply from them. My bike showing speedsensor fault

Hello chaps, can someone who has fitted their chip to a Vala please reach out, I am using a previous chip and wonder if I need to send it back and get the new one?

I am Kerry Burn, and v easy to find (Owner, 848 group)